logo



Exhausts & Exhaust Castings

To order | Home

STOCK NO.
DETAILS
PRICE
EX15C
camera - click here to see picture

Model Exhaust Pot Castings

This exhaust pot casting is a reproduction of a silencer seen with many small power engines. This style is suitable for the Stuart 800, Centaur, Wyvern and other model open crank & side shaft gas engines but can also be used on a variety of engines.Picture shows a casting next to an E T Westbury Centaur engine (engine NOT for sale)

Comprises of:-

  • One casting with blank inlet and outlet flange faces requiring drilling
  • Two steel profiled loose flanges to allow bolted pipe connections
  • One steel closing plate (fitted)
  • 3" tall (78mm), 3.1" (80mm) diameter, Flange width 1.6" (42mm), Flange hole outlet 6mm, flange bolt holes 4mm
£49.50
EX30C
camera - click here to see picture

Exhaust Pot Castings

This exhaust pot casting is a reproduction of a silencer seen with many small power engines and suitable for a variety of engines. They can be found on Hartop, Gardner, Stuart and Leek engines amonst others.

  • One raw casting that has a blank inlet and outlet flanges to allow them to be drilled to a suitable size
  • Base plate is separate to allow for easy cleaning of carbon deposits
  • Supplied with two flanges
  • 5.5" tall (less base), 5.25" diameter
£79.50
EXA8
camera - click here to see picture

Amanco / Fairbanks Exhaust Castings

Raw castings suitable for Amanco, Fairbanks or similar

7.5" diameter, 4.5" tall, 1.25" diameter pilot hole

£49.50
EXBN118-7
camera - click here to see picture

Bamford N118 exhaust pot

Bamford finished / machined exhaust pot. 4.75" diameter, 3" tall

 
£74.50
RWEXC
camera - click here to see picture

Model engine exhaust casting

Raw casting for model engine exhaust. 2" diameter

 
£24.50
ECEX
camera - click here to see picture

Fully machined exhaust pot

Fully machined exhaust suitable for half size engines such as our Economy. Steel with 1/4 BSP male thread. 7.5cm diameter

 
£46.50
EXAPHR9
camera - click here to see picture

Ruston Hornsby AP Exhaust Casting

Raw casting. 9" diameter, 4" deep
£96

Top of Page

To order | Home
Model Petrol engine Machined kit| Workshop Equipment Castings | Exhaust castings & Exhausts
Hot air engine castings | Petrol engine castings | Steam engine castings | Flywheel castings


L A Services Ltd, Bramcote, Warwickshire Tel: 01455 220340
The Engineers Emporium is a registered trademark of LA Services Ltd © 1999-2024 E & O.E